Excellent cement based board for overboarding wooden or concrete floors INSTEAD of plywood which is vulnerable to moisture.

• To overboard wooden floors, use Mega Strength adhesive (1 tube will do about 5 boards) and 25mm No More Ply screws (8 or 9 screws per board is usually sufficient)
• To overboard solid floors, prime both sides with SBR primer then use a single-part flexible powder based tile adhesive (preferably slow-set) such as Benferflex C2.
• Score & snap the boards using the No More Ply scoring knife or use a jigsaw with a tungsten-carbide blade

Also excellent for overboarding solid walls INSTEAD of plasterboard which is weak & vulnerable to moisture.

• Prime both sides with SBR primer then dot & dab onto solid walls using a single-part flexible powder based tile adhesive (preferably slow-set) such as Benferflex C2.
• To overboard stud partitions with 6mm No More Ply stud centres must be no more than 400mm.  Alternatively, use either 9mm or 12mm No More Ply boards for greater strength.  Mega Strength adhesive and No More Ply screws should be used.

BBA approved 6mm No More Ply tile backer board is guaranteed for 15 years.  For more details or to download an installation booklet visit www.nomoreply.net.