9mm No More Ply tile backer board is excellent for boarding walls INSTEAD of plasterboard which is weak and vunerable to moisture.  It is BBA approved, guaranteed for 15 years and tested to hold large and heavy tiles up to 60kg/m².

• To overboard solid walls, prime both sides with SBR primer then dot & dab using a single-part flexible powder-based adhesive such as Benferflex C2 (slow set) or Benferflex Rapido (fast set).
• To overboard solid floors, prime both sides with SBR primer then fully stick the boards with a single-part flexible powder-based adhesive (preferably slow-set) such as Benferflex C2
• To overboard stud partitions or wooden floors, use Mega Strength adhesive (1 tube will do about 5 boards) and 38mm No More Ply screws (8 or 9 screws per board is usually sufficient)
• Score & snap using the No More Ply scoring knife or use a jigsaw with a tungsten-carbide blade.

Note: 6mm No More Ply is usually sufficient to overboard floors but 9mm is useful if the floor levels need to be raised.

For more details or to download an installation booklet visit www.nomoreply.net.